 |
 K1000 Katanax Electric Fluxer - One Sample
- Single position electric fluxer.
- Completely independent heater for crucible and mold for optimal temperature control and homogenization.
- XRF, AA and ICP fusion machine: both disk and solution units included.
- Ready to fuse with built -in methods for oxides, minerals, metals, alloys, sulfides, fluorides and more.
- Throughput of up to 5 to 7 samples an hour.
|
| Specifications |
| Dimensions: | 39.5 cm (15.6 in) high x 27.5 cm (10.9 in) wide x 58.5 cm (23.1 in) deep |
| Weight: | 30 kg (66 lbs) |
| Power Cord: | 3-prong grounded plug for 115 V/60 Hz version |
| Voltage: | 115 V/60 Hz |
| Heating: | Heating is done by the use of an electric furnace. No dangerous gases such as propane are stored in the laboratory. |
| Exhaust: | A fume hood should be provided to evacuate volatiles and heat from the fusion. |
| Specifications |
| Dimensions: | 39.5 cm (15.6 in) high x 27.5 cm (10.9 in) wide x 58.5 cm (23.1 in) deep |
| Weight: | 30 kg (66 lbs) |
| Power Cord: | 3-prong grounded plug for 115 V/60 Hz version |
| Voltage: | 115 V/60 Hz |
| Heating: | Heating is done by the use of an electric furnace. No dangerous gases such as propane are stored in the laboratory. |
| Exhaust: | A fume hood should be provided to evacuate volatiles and heat from the fusion. |
 K2000 Katanax Electric Fluxer - Five Sample
- Five position electric fluxer.
- Completely independent heater for crucible and mold for optimal temperature control and homogenization.
- XRF, AA and ICP fusion machine: disk and solution units are integrated.
- Ready to fuse with built -in methods for oxides, minerals, metals, alloys, sulfides, fluorides and more.
- Throughput of 20-24 samples an hour.
|
| Specifications |
| Dimensions: | 48 cm (19 in) high x 91 cm (36 in) wide x 48 cm (19in) deep |
| Weight: | 43 kg (95 lbs) |
| Power Cord: | 2-prong plug for 230 V/50 Hz version |
| Voltage: | 230 V/50 Hz |
| Heating: | Heating is done by the use of an electric furnace. No dangerous gases such as propane are stored in the laboratory. |
| Exhaust: | A fume hood should be provided to evacuate volatiles and heat from the fusion. |
|