 |
 3630 Automated X-Press
This unique programmable laboratory press performs the entire pressing cycle with the push
of a single button.
The 3630 X-Press is a 35-ton programmable hydraulic press intended for the repetitive
pressing of sample pellets for spectroscopy. Automation greatly improves sample
uniformity and frees the technician for other tasks, as this press will operate unattended.
In automatic mode, this press performs a complete pressing cycle. On starting, it goes to
a selected pressure, maintains the pressure for a set time, and drops the pressure to zero
over a programmed interval. On completion of the cycle, the press returns the platen
back to the base position and makes an audible signal indicating it is ready for the next
sample.
The 3630 accepts all SPEX SamplePrep pellet dies and can also be operated manually as
a simple motorized press whose functions are under direct user control.
Safety features include a transparent polycarbonate door with system interlock,
and a pump cutoff in case of system or operator error.
- Unique programmable laboratory press.
- 35-ton hydraulic press for repetitive pressing of sample pellets.
- Automation improves sample uniformity, consistency and throughput.
- Program allows the technician to enter final pressure desired, time to hold at the
final pressure, and interval to return back to zero pressure.
- Typical pressing cycle is less than two minutes.
- Accepts all SPEX SamplePrep die sets.
- A safety interlock and automatic pump shut-off safety valve ensure safe operation.
- A European CEE 7/7 two-prong plug is supplied with each 3630-230 system.
|
| Specifications |
| Dimensions: | 23 in. (58 cm) x 11 in. (28 cm) x 32 ½ in. (82 cm) |
| Weight: | 121 lbs. net (55 kg); 190 lbs. gross (87 kg) |
| Motor: | 1/3 horsepower |
| Voltage: | 115V/60Hz |
| Force: | 10-35 tons ram pressure (20,000 - 70,000 Ibs.) |
| Platen Movement: | 1.0 inch (2.5 cm) |
| Platen Size: | 3.25 inches diameter (8 cm) |
| Daylight: | Adjustable 2.0 to 6.0 inches (5 to 15 cm) |
| Upper Screw Adjustment: | 3.5 inches (9 cm) |
  3630-230 Automated X-Press
For 230 V/50 Hz operation. A European CEE 7/7 two-prong plug is supplied with the 8000D-230 systems. A European CEE 7/7 two-prong plus is supplied with each 3630-230 system. |
| Specifications |
| Dimensions: | 23 in. (58 cm) x 11 in. (28 cm) x 32 ½ in. (82 cm) |
| Weight: | 121 lbs. net (55 kg); 190 lbs. gross (87 kg) |
| Motor: | 1/3 horsepower |
| Voltage: | 230V/50Hz |
| Force: | 10-35 tons ram pressure (20,000 - 70,000 Ibs.) |
| Platen Movement: | 1.0 inch (2.5 cm) |
| Platen Size: | 3.25 inches diameter (8 cm) |
| Daylight: | Adjustable 2.0 to 6.0 inches (5 to 15 cm) |
| Upper Screw Adjustment: | 3.5 inches (9 cm) |
3628 Bench-Press®
• Air-actuated, manually controlled laboratory press.
• 25-Ton maximum pressure is ideal for pressing sample pellets for XRF, IR, and other analytical methods.
• Compact design ideally suited for laboratory bench-top applications.
• Patented air-actuation system combines ease of use of a motorized press with the simplicity of a manual press.
• Single push-button operation.
• Pressure is measured with a dial and the pressure control valve can be set to produce repetitive, reproducible pressures.
• Neither hand-pumping nor electrical hook-up is required.
• Can be operated off an air compressor or a tank of compressed air.
|
| Specifications |
| Dimensions: | 1 in. (28 cm) x 21 in. (53 cm) x 28 in. (71 cm) |
| Weight: | 120 lbs. net (55 kg) 205 lbs. gross (93 kg) |
| Platen Movement: | 1 ¾ in. (4.4 cm) |
| Platen Size: | 5 ½ in. diameter (14 cm) |
| Daylight: | Adjustable 1 ¼ to 5 ¾ inches (3.2 to 14.6 cm) |
|