 |
 2000 Geno/Grinder
- Unique vigorous up-and-down grinding/pulverizing action.
- Prepares plant material such as seeds, stems, roots, leaves, and certain animal tissue.
- Sample preparation is completed in about two minutes with the addition of 1-2 grinding balls to the sample along with a buffer solution.
- Handles two standard deep-well titer plates (5 in. long x 3 in. wide x 2 in. high).
- Supplied with height adjustment spacers to handle titer plates, racks, vials, and other configurations of up to 2 1/4 inches in height.
- A digital timer displays both the full timer setting along with the minutes and seconds remaining in the grinding cycle.
- An adjustable dial allows the operator to set the precise vertical grinding speed between 500 and 2000 strokes per minute.
- Two safety interlocks, a lockdown latch and a pneumatic cylinder stabilize the lid for safe operation.
- The clamping mechanism latches have secondary locking tabs for additional safety.
- Isolation of nucleic acids (DNA/RNA), proteins, enzymes and yeast.
- Automated mechanical disruption of plant and animal tissue.
- Cryogenic accessories available.
- Used in high-throughput laboratory screening facilities.
- Efficient micro-titer plate format.
- Elimination of cross-contamination.
|
| Specifications |
| Dimensions: | 20.5 in. (52 cm) widex 16.9 in. (43 cm) deep x 22 in. (56 cm) high |
| Weight: | 20.5 in. (52 cm) widex 16.9 in. (43 cm) deep x 22 in. (56 cm) high |
| Motor: | ½ HP |
| Power Cord: | 3-prong grounded plug for 115 V/60 Hz version |
| Fuse: | 10 Amp @ 115 V/60 Hz |
| Clamp Movement: | 1.25 in. (3.2 cm) vertical |
| Clamp Speed: | Adjustable from 500 to 1600 strokes/minute Speeds above 1200 not recommended for#2195 Large Capacity Clamp |
| Timer: | Digital in minutes: seconds, maximum 99:59(typical running times are under 2 minutes) |
| Specifications |
| Dimensions: | 20.5 in. (52 cm) widex 16.9 in. (43 cm) deep x 22 in. (56 cm) high |
| Weight: | 110 lbs. Net (50 kg), 168 lbs. Gross (76 kg) ½ HP |
| Motor: | ½ HP |
| Power Cord: | 2-prong European plug for 230 V/50 Hz version |
| Fuse: | 8 Amp @ 230 V/50 Hz |
| Clamp Movement: | 1.25 in. (3.2 cm) vertical |
| Clamp Speed: | Adjustable from 500 to 1600 strokes/minute Speeds above 1200 not recommended for#2195 Large Capacity Clamp |
| Timer: | Digital in minutes: seconds, maximum 99:59(typical running times are under 2 minutes) |
  2600 Cryo-Station
A holding station for samples which must be kept chilled to preserve RNA for extraction. The insulated outer jacket of the Cryo-Station is chilled with liquid nitrogen and can be filled automatically or manually. Two titer plates can be placed in the Cryo-Station well to be filled and kept cold. The well can also hold a chilled cutting board to cut up sensitive samples for RNA analysis. |
2650 Cryo Adapter
A single piece of extruded aluminum, to be chilled and then inserted into a 2210 Titer Plate. The Cryo-Block fingers fit the gaps between the round cells, and keep temperatures inside the cells low enough to preserve RNA. The Cryo-Block and Titer Plate combination can be used with the 2600 Cryo-Station. |
|