 |
SPEX SamplePrep Spec-Caps are shallow, thin-walled aluminum cups which are routinely used in the production of pressed-powder sample discs for OES, XRF, and other analytical techniques.
In the finished pellet, briquette, etc, the Spec-Cap forms the bottom and sides. Thus reinforced, sample discs are resistant to chipping and breaking, and are more easily handled, marked, and stored than unclad discs.
  3619 30 mm Spec-Cap®
30 mm wide x 8 mm deep, for 3623 die. Produces pellets 31 mm x 5 mm. Outside painted to prevent seizure in die and to facilitate labeling. Sold in units of 100. |
3619A 31 mm Pre-Flared Spec-Cap
31 mm x 8 mm, for 3623 die. The 3619A has been pre-flared for a snug fit in the 3623 31 mm Evacuable Pellet Die, and has an unpainted surface. It may be substituted for the 3619 30 mm Spec-Cap in all applications where flaring is recommended. Eliminates need for 3618 Edge-Flaring Tool. Sold in units of 100. |
3615 33 mm Spec-Cap
33 mm x 8 mm, for 3616 die. Produces pellets 35 mm x 5 mm. Outside painted to prevent seizure in die and to facilitate labeling. Sold in units of 100. |
3617 38 mm Spec-Cap
38 mm wide x 9 mm deep, for 3614 die. Produces pellets 40 mm x 5 mm. Outside is painted to prevent seizure in die and to facilitate labeling. Sold in units of 100. |
3618 Edge-Flaring Tool
For 3617 and 3619 Spec-Caps. This tool widens the Spec-Cap rim to ensure a snug fit against the walls of the die, thus preventing sample loss and pellet jamming. |
3625 Edge-Flaring Tool
For 3615 Spec-Caps. The Edge-Flaring Tool widens the Spec-Cap rim to ensure a snug fit against the walls of the 3616 die, thus preventing sample loss and pellet jamming. |
3650 PrepAid Vertrel XF
Liquid fluorocarbon grinding aid. Prevents caking, reduces contamination, evaporates after grinding. One-quart bottle. Instructions included. |
3642-150 PrepAid Cellulose Binder (C6H10O5)n
£20µ powder, 150 g bottle. Can be blended with sample at 10% by weight to form XRF sample disc, or used undiluted as sample matrix with Sleeve-and-Plunger Set. Instructions included. |
3642-450 PrepAid Cellulose Binder (C6H10O5)n
£20µ powder, 450 g bottle. Can be blended with sample at 10% by weight to form XRF sample disc, or used undiluted as sample matrix with Sleeve-and-Plunger Set. Instructions included. |
3644-150 PrepAid UltraBindTM
<20µ powder, 150 g bottle. Can be blended with sample at 10% by weight to form XRF sample disc, or used undiluted as sample matrix with Sleeve-and-Plunger Set. Combines the moisture resistance of Paraffin Binder along with the ease of removing a prepared disc from the die set associated with the Cellulose Binder. Will bond 200-250 discs or provide matrix for 25-35 supported-sample discs. Instructions included. |
3644-450 PrepAid UltraBindTM
<20µ powder, 450 g bottle. Can be blended with sample at 10% by weight to form XRF sample disc, or used undiluted as sample matrix with Sleeve-and-Plunger Set. Combines the moisture resistance of Paraffin Binder along with the ease of removing a prepared disc from the die set associated with the Cellulose Binder. Instructions included. |
| SPEX SamplePrep X-Cells | | X-Cell Number | Description | Overall Height (mm) | Overall O.D. (mm) | Window Plane O.D. (mm) | Aperture (mm) | Capacity (ml) | | 3529 | 31 mm X-Cell | 22 | 32.0 | 30.5 | 24.5 | 8 | | 3561 | 31 mm Universal X-Cell | 22 | 31.6 | 31.6 | 24.5 | 8 | | 3571 | 31 Open End X-Cell | 22 | 31.6 | 31.6 | 24.5 | 10 | | 3527 | 40 mm X-Cell | 22 | 39.5 | 38.0 | 31.5 | 13 | | 3565 | 43 mm X-Cell | 19 | 48.0 | 43.0 | 38.8 | 11.5* | | 3577 | Micro X-Cell | 22 | 31.6 | 31.6 | 6.3 | 0.5 | | *to fill line |
|
3527I Bubble-Free Cell Insert
Patented insert for the 3527 40 mm X-cell. Prevents trapped air from forming a bubble under the window film when the X-cell is used in the upright position. Sold separately from 3527 X-cell in units of 100. Instructions included. |
3565 X-Cell, 43 mm Disposable Closed X-Ray Cell
For Horiba Sulfur Analyzers. Polyethylene snap-on collar and cup with vent and reservoir. Features recessed window, and fill mark on inside of cup. Requires window film. Sold in units of 100. |
3571 X-Cell, 31 mm Double Open End X-Ray Cell with Collar
Two polyethylene snap-rings, collar, and open body. Versatile design accepts liquids, pastes, powders and other solids. Squared snap-ring insures proper positioning in standard 31 mm sample holders. Can be run with open back, sealed window back, or micro-porous film. Requires window film. Sold in units of 100. |
3577 X-Cell, 31 mm Micro X-ray Cell with Collar
Two polyethylene snap-rings, collar, and open body. Unique cell for small, air-sensitive or hazardous samples. 6.3 mm window is centered in standard 31 mm sample holder. Can be run with open back, sealed window back, or micro-porous film. For hazardous or sensitive samples, top can be fitted with a standard 7 x 13 mm serum bottle closure for injection, purging, or sample isolation. Requires window film. Sold in units of 100. |
| SPEX SamplePrep XRF Window Film | | | | Thickness | | | | | | Film Number | Description | mil | (micron) | Type | Qty. | Diameter | Features | | 3511 | Kapton | .3 | (8) | roll | 50 ft(15m) | - | Extremely strong, chemically resistant, thermally stable | | 3511 | Kapton | .3 | (8) | precut | 500 circles | 21/2in. | Extremely strong, chemically resistant, thermally stable | | 3515 | Mylar | .25 | (6) | precut | 500 circles | 31/4in. | Very strong, economical, chemically resistant | | 3516 | Mylar | .12 | (3) | roll | 300 ft (92m) | - | Very strong, economical, chemically resistant | | 3517 | Mylar | .25 | (6) | roll | 300 ft (92m) | - | Very strong, economical, chemically resistant | | 3518 | Mylar | .25 | (6) | precut | 500 circles | 21/2in. | Very strong, economical, chemically resistant | | 3520 | Polypropylene | .20 | (5) | roll | 300 ft (92m) | - | General purpose and good transmission characteristics. | | 3521 | Polypropylene | .20 | (5) | precut | 500 circles | 21/2in. | General purpose and good transmission characteristics. | | 3522 | Polycarbonate | .20 | (5) | roll | 300 ft (92m) | - | Excellent transmission characteristics for light elements | | 3524 | Micro-porous Teflon | 0.2 | micron pores | roll | 17 ft (5m) | - | Gas slowly passes through during vacuum path operation | | 3525 | Ultralene | 0.16 | (4) | roll | 300 ft (92m) | - | Highest strength with best transmission characteristics | | 3526 | Ultralene | 0.16 | (4) | precut | 500 circles | 21/2in. | Low impurities and excellent X-Ray transmission especially form lighter elements |
|
3511 Kapton® Window Film (Roll)
0.3 mil (8µ) thick. Supplied as continuous roll 27/8 in. (73 mm) wide, 50 ft. (15 m) long, in box with serrated edge for tearing film to desired length. |
3516 Mylar® Window Film (Roll)
0.12 mil (3µ) thick. Supplied as continuous roll 27/8 in. (73 mm) wide, 300 ft. (92 m) long, in box with serrated edge for tearing to desired length. |
3517 Mylar® Window Film (Roll)
0.25 mil (6µ) thick. Supplied as continuous roll 27/8 in. (73 mm) wide, 300 ft. (92 m) long, in box with serrated edge for tearing to desired length. |
3524 Micro-porous Teflon® Film (Roll)
0.2 micron pores. Installed on top of open ended cells. Gas slowly passes through the porous film during vacuum path operation. Supplied as continuous roll 2in. (51 mm) wide, 17 ft. (5 m) long in box. Allows pressure equalization inside cell without releasing liquid samples. |
3525 Ultralene® Window Film (Roll)
0.16 mil (4µ) thick. Supplied as continuous roll 27/8 in. (73 mm) wide, 300 ft. (92 m) long, in box with serrated edge for tearing to desired length. |
|
